Many people prefer to call Silver Shine Slate as Silver Shine Quartzite. It is a highly durable natural stone, best known for its striking silver shades and sophisticated gloss. It includes quite a noticeable metallic color and works best for architects and designers. It is advantageous for interior and exterior framing. Its appealing appearance combined with its low-maintenance and wear-resistance only makes it a better choice. With this stone, you get the beauty of modern engineering alongside natural endurance. This particular stone is quarried in India’s Rajasthan region.
The formation of silver shine slate begins with sandstone which metamorphoses into quartzite slate through intense heat and pressure. This forces the sandstone to recrystallize resulting in a hard dense material which has a unique sparkle (granular appearance). The unique silver sheen comes from the presence of mica and other reflective minerals embedded in the stone.
The state of Rajasthan in India, rich in Slate and quartzite stones, is the prime region to extract this stone. Mining techniques used are environmentally friendly and do not harm the stone or the surrounding area.
Maintenance Tips for Silver Shine Slate
1. Sealing: A high-quality seal which protects against stains while enhancing the silver shine should be applied.
2. Cleaning: The use of a harsh chemical, acid or pH cleanser is ill advised.
3. Routine Care: Regular sweeping and the use of a damp mop or cloth will maintain its luster.
4. Long Term Care: In high traffic areas or areas prone to moisture, re-seal annually to provide additional protection.
Read more
Silver Shine Slate offers a wide range of advantages that make it a popular choice for both residential and commercial applications:
1. Durability
2. Slip Resistance
3. Weather Resistant
4. Low Maintenance
5. Eco-Friendly
| Material Type | Slate |
| Color | Silver |
| Compressive Strength |
Approx. 1000–1400 kg/cm²
|
| After Freezing |
900–1300 kg/cm²
|
| Ultimate Tensile Strength |
60–110 kg/cm²
|
| Water Absorption | 0.3–0.7% |
| Impact Test (Min Fall HT) | 60–80 cm |
| Bulk Density |
2700–2800 kg/m³
|
| Flooring |
|
Wall cladding
|
|
Landscaping
|
| Paving |
|
Countertops and tabletops
|
